 |
Index for
Section 1 |
|
 |
Alphabetical
listing for P |
|
 |
Bottom of
page |
|
PERLSOLARIS(1)
NAME
README.solaris - Perl version 5 on Solaris systems
DESCRIPTION
This document describes various features of Sun's Solaris operating system
that will affect how Perl version 5 (hereafter just perl) is compiled
and/or runs. Some issues relating to the older SunOS 4.x are also
discussed, though they may be out of date.
For the most part, everything should just work.
Starting with Solaris 8, perl5.00503 (or higher) is supplied with the
operating system, so you might not even need to build a newer version of
perl at all. The Sun-supplied version is installed in /usr/perl5 with
/usr/bin/perl pointing to /usr/perl5/bin/perl. Do not disturb that
installation unless you really know what you are doing. If you remove the
perl supplied with the OS, you will render some bits of your system
inoperable. If you wish to install a newer version of perl, install it
under a different prefix from /usr/perl5. Common prefixes to use are
/usr/local and /opt/perl.
You may wish to put your version of perl in the PATH of all users by
changing the link /usr/bin/perl. This is probably OK, as most perl scripts
shipped with Solaris use an explicit path. (There are a few exceptions,
such as /usr/bin/rpm2cpio and /etc/rcm/scripts/README, but these are also
sufficiently generic that the actual version of perl probably doesn't
matter too much.)
Solaris ships with a range of Solaris-specific modules. If you choose to
install your own version of perl you will find the source of many of these
modules is available on CPAN under the Sun::Solaris:: namespace.
Solaris may include two versions of perl, e.g. Solaris 9 includes both
5.005_03 and 5.6.1. This is to provide stability across Solaris releases,
in cases where a later perl version has incompatibilities with the version
included in the preceeding Solaris release. The default perl version will
always be the most recent, and in general the old version will only be
retained for one Solaris release. Note also that the default perl will NOT
be configured to search for modules in the older version, again due to
compatibility/stability concerns. As a consequence if you upgrade Solaris,
you will have to rebuild/reinstall any additional CPAN modules that you
installed for the previous Solaris version. See the CPAN manpage under
'autobundle' for a quick way of doing this.
As an interim measure, you may either change the #! line of your scripts to
specifically refer to the old perl version, e.g. on Solaris 9 use
#!/usr/perl5/5.00503/bin/perl to use the perl version that was the default
for Solaris 8, or if you have a large number of scripts it may be more
convenient to make the old version of perl the default on your system. You
can do this by changing the appropriate symlinks under /usr/perl5 as
follows (example for Solaris 9):
# cd /usr/perl5
# rm bin man pod
# ln -s ./5.00503/bin
# ln -s ./5.00503/man
# ln -s ./5.00503/lib/pod
# rm /usr/bin/perl
# ln -s ../perl5/5.00503/bin/perl /usr/bin/perl
In both cases this should only be considered to be a temporary measure -
you should upgrade to the later version of perl as soon as is practicable.
Note also that the perl command-line utilities (e.g. perldoc) and any that
are added by modules that you install will be under /usr/perl5/bin, so that
directory should be added to your PATH.
Solaris Version Numbers.
For consistency with common usage, perl's Configure script performs some
minor manipulations on the operating system name and version number as
reported by uname. Here's a partial translation table:
Sun: perl's Configure:
uname uname -r Name osname osvers
SunOS 4.1.3 Solaris 1.1 sunos 4.1.3
SunOS 5.6 Solaris 2.6 solaris 2.6
SunOS 5.8 Solaris 8 solaris 2.8
SunOS 5.9 Solaris 9 solaris 2.9
SunOS 5.10 Solaris 10 solaris 2.10
The complete table can be found in the Sun Managers' FAQ
<ftp://ftp.cs.toronto.edu/pub/jdd/sunmanagers/faq> under "9.1) Which Sun
models run which versions of SunOS?".
RESOURCES
There are many, many sources for Solaris information. A few of the
important ones for perl:
Solaris FAQ
The Solaris FAQ is available at
<http://www.science.uva.nl/pub/solaris/solaris2.html>.
The Sun Managers' FAQ is available at
<ftp://ftp.cs.toronto.edu/pub/jdd/sunmanagers/faq>
Precompiled Binaries
Precompiled binaries, links to many sites, and much, much more are
available at <http://www.sunfreeware.com/> and
<http://www.blastwave.org/>.
Solaris Documentation
All Solaris documentation is available on-line at
<http://docs.sun.com/>.
SETTING UP
File Extraction Problems on Solaris.
Be sure to use a tar program compiled under Solaris (not SunOS 4.x) to
extract the perl-5.x.x.tar.gz file. Do not use GNU tar compiled for SunOS4
on Solaris. (GNU tar compiled for Solaris should be fine.) When you run
SunOS4 binaries on Solaris, the run-time system magically alters pathnames
matching m#lib/locale# so that when tar tries to create lib/locale.pm, a
file named lib/oldlocale.pm gets created instead. If you found this advice
too late and used a SunOS4-compiled tar anyway, you must find the
incorrectly renamed file and move it back to lib/locale.pm.
Compiler and Related Tools on Solaris.
You must use an ANSI C compiler to build perl. Perl can be compiled with
either Sun's add-on C compiler or with gcc. The C compiler that shipped
with SunOS4 will not do.
Include /usr/ccs/bin/ in your PATH.
Several tools needed to build perl are located in /usr/ccs/bin/: ar, as,
ld, and make. Make sure that /usr/ccs/bin/ is in your PATH.
You need to make sure the following packages are installed (this info is
extracted from the Solaris FAQ):
for tools (sccs, lex, yacc, make, nm, truss, ld, as): SUNWbtool, SUNWsprot,
SUNWtoo
for libraries & headers: SUNWhea, SUNWarc, SUNWlibm, SUNWlibms, SUNWdfbh,
SUNWcg6h, SUNWxwinc, SUNWolinc
for 64 bit development: SUNWarcx, SUNWbtoox, SUNWdplx, SUNWscpux,
SUNWsprox, SUNWtoox, SUNWlmsx, SUNWlmx, SUNWlibCx
If you are in doubt which package contains a file you are missing, try to
find an installation that has that file. Then do a
$ grep /my/missing/file /var/sadm/install/contents
This will display a line like this:
/usr/include/sys/errno.h f none 0644 root bin 7471 37605 956241356 SUNWhea
The last item listed (SUNWhea in this example) is the package you need.
Avoid /usr/ucb/cc.
You don't need to have /usr/ucb/ in your PATH to build perl. If you want
/usr/ucb/ in your PATH anyway, make sure that /usr/ucb/ is NOT in your PATH
before the directory containing the right C compiler.
Sun's C Compiler
If you use Sun's C compiler, make sure the correct directory (usually
/opt/SUNWspro/bin/) is in your PATH (before /usr/ucb/).
GCC
If you use gcc, make sure your installation is recent and complete. perl
versions since 5.6.0 build fine with gcc > 2.8.1 on Solaris >= 2.6.
You must Configure perl with
$ sh Configure -Dcc=gcc
If you don't, you may experience strange build errors.
If you have updated your Solaris version, you may also have to update your
gcc. For example, if you are running Solaris 2.6 and your gcc is installed
under /usr/local, check in /usr/local/lib/gcc-lib and make sure you have
the appropriate directory, sparc-sun-solaris2.6/ or i386-pc-solaris2.6/.
If gcc's directory is for a different version of Solaris than you are
running, then you will need to rebuild gcc for your new version of Solaris.
You can get a precompiled version of gcc from <http://www.sunfreeware.com/>
or <http://www.blastwave.org/>. Make sure you pick up the package for your
Solaris release.
If you wish to use gcc to build add-on modules for use with the perl
shipped with Solaris, you should use the Solaris::PerlGcc module which is
available from CPAN. The perl shipped with Solaris is configured and built
with the Sun compilers, and the compiler configuration information stored
in Config.pm is therefore only relevant to the Sun compilers. The
Solaris:PerlGcc module contains a replacement Config.pm that is correct for
gcc - see the module for details.
GNU as and GNU ld
The following information applies to gcc version 2. Volunteers to update
it as appropropriate for gcc version 3 would be appreciated.
The versions of as and ld supplied with Solaris work fine for building
perl. There is normally no need to install the GNU versions to compile
perl.
If you decide to ignore this advice and use the GNU versions anyway, then
be sure that they are relatively recent. Versions newer than 2.7 are
apparently new enough. Older versions may have trouble with dynamic
loading.
If you wish to use GNU ld, then you need to pass it the -Wl,-E flag. The
hints/solaris_2.sh file tries to do this automatically by setting the
following Configure variables:
ccdlflags="$ccdlflags -Wl,-E"
lddlflags="$lddlflags -Wl,-E -G"
However, over the years, changes in gcc, GNU ld, and Solaris ld have made
it difficult to automatically detect which ld ultimately gets called. You
may have to manually edit config.sh and add the -Wl,-E flags yourself, or
else run Configure interactively and add the flags at the appropriate
prompts.
If your gcc is configured to use GNU as and ld but you want to use the
Solaris ones instead to build perl, then you'll need to add -B/usr/ccs/bin/
to the gcc command line. One convenient way to do that is with
$ sh Configure -Dcc='gcc -B/usr/ccs/bin/'
Note that the trailing slash is required. This will result in some
harmless warnings as Configure is run:
gcc: file path prefix `/usr/ccs/bin/' never used
These messages may safely be ignored. (Note that for a SunOS4 system, you
must use -B/bin/ instead.)
Alternatively, you can use the GCC_EXEC_PREFIX environment variable to
ensure that Sun's as and ld are used. Consult your gcc documentation for
further information on the -B option and the GCC_EXEC_PREFIX variable.
Sun and GNU make
The make under /usr/ccs/bin works fine for building perl. If you have the
Sun C compilers, you will also have a parallel version of make (dmake).
This works fine to build perl, but can sometimes cause problems when
running 'make test' due to underspecified dependencies between the
different test harness files. The same problem can also affect the
building of some add-on modules, so in those cases either specify '-m
serial' on the dmake command line, or use /usr/ccs/bin/make instead. If
you wish to use GNU make, be sure that the set-group-id bit is not set. If
it is, then arrange your PATH so that /usr/ccs/bin/make is before GNU make
or else have the system administrator disable the set-group-id bit on GNU
make.
Avoid libucb.
Solaris provides some BSD-compatibility functions in /usr/ucblib/libucb.a.
Perl will not build and run correctly if linked against -lucb since it
contains routines that are incompatible with the standard Solaris libc.
Normally this is not a problem since the solaris hints file prevents
Configure from even looking in /usr/ucblib for libraries, and also
explicitly omits -lucb.
Environment for Compiling perl on Solaris
PATH
Make sure your PATH includes the compiler (/opt/SUNWspro/bin/ if you're
using Sun's compiler) as well as /usr/ccs/bin/ to pick up the other
development tools (such as make, ar, as, and ld). Make sure your path
either doesn't include /usr/ucb or that it includes it after the compiler
and compiler tools and other standard Solaris directories. You definitely
don't want /usr/ucb/cc.
LD_LIBRARY_PATH
If you have the LD_LIBRARY_PATH environment variable set, be sure that it
does NOT include /lib or /usr/lib. If you will be building extensions that
call third-party shared libraries (e.g. Berkeley DB) then make sure that
your LD_LIBRARY_PATH environment variable includes the directory with that
library (e.g. /usr/local/lib).
If you get an error message
dlopen: stub interception failed
it is probably because your LD_LIBRARY_PATH environment variable includes a
directory which is a symlink to /usr/lib (such as /lib). The reason this
causes a problem is quite subtle. The file libdl.so.1.0 actually *only*
contains functions which generate 'stub interception failed' errors! The
runtime linker intercepts links to "/usr/lib/libdl.so.1.0" and links in
internal implementations of those functions instead. [Thanks to Tim Bunce
for this explanation.]
RUN CONFIGURE.
See the INSTALL file for general information regarding Configure. Only
Solaris-specific issues are discussed here. Usually, the defaults should
be fine.
64-bit perl on Solaris.
See the INSTALL file for general information regarding 64-bit compiles. In
general, the defaults should be fine for most people.
By default, perl-5.6.0 (or later) is compiled as a 32-bit application with
largefile and long-long support.
General 32-bit vs. 64-bit issues.
Solaris 7 and above will run in either 32 bit or 64 bit mode on SPARC CPUs,
via a reboot. You can build 64 bit apps whilst running 32 bit mode and
vice-versa. 32 bit apps will run under Solaris running in either 32 or 64
bit mode. 64 bit apps require Solaris to be running 64 bit mode.
Existing 32 bit apps are properly known as LP32, i.e. Longs and Pointers
are 32 bit. 64-bit apps are more properly known as LP64. The
discriminating feature of a LP64 bit app is its ability to utilise a 64-bit
address space. It is perfectly possible to have a LP32 bit app that
supports both 64-bit integers (long long) and largefiles (> 2GB), and this
is the default for perl-5.6.0.
For a more complete explanation of 64-bit issues, see the "Solaris 64-bit
Developer's Guide" at <http://docs.sun.com/>
You can detect the OS mode using "isainfo -v", e.g.
$ isainfo -v # Ultra 30 in 64 bit mode
64-bit sparcv9 applications
32-bit sparc applications
By default, perl will be compiled as a 32-bit application. Unless you want
to allocate more than ~ 4GB of memory inside perl, or unless you need more
than 255 open file descriptors, you probably don't need perl to be a 64-bit
app.
Large File Support
For Solaris 2.6 and onwards, there are two different ways for 32-bit
applications to manipulate large files (files whose size is > 2GByte). (A
64-bit application automatically has largefile support built in by
default.)
First is the "transitional compilation environment", described in
lfcompile64(5). According to the man page,
The transitional compilation environment exports all the
explicit 64-bit functions (xxx64()) and types in addition to
all the regular functions (xxx()) and types. Both xxx() and
xxx64() functions are available to the program source. A
32-bit application must use the xxx64() functions in order
to access large files. See the lf64(5) manual page for a
complete listing of the 64-bit transitional interfaces.
The transitional compilation environment is obtained with the following
compiler and linker flags:
getconf LFS64_CFLAGS -D_LARGEFILE64_SOURCE
getconf LFS64_LDFLAG # nothing special needed
getconf LFS64_LIBS # nothing special needed
Second is the "large file compilation environment", described in
lfcompile(5). According to the man page,
Each interface named xxx() that needs to access 64-bit entities
to access large files maps to a xxx64() call in the
resulting binary. All relevant data types are defined to be
of correct size (for example, off_t has a typedef definition
for a 64-bit entity).
An application compiled in this environment is able to use
the xxx() source interfaces to access both large and small
files, rather than having to explicitly utilize the transitional
xxx64() interface calls to access large files.
Two exceptions are fseek() and ftell(). 32-bit applications should use
fseeko(3C) and ftello(3C). These will get automatically mapped to
fseeko64() and ftello64().
The large file compilation environment is obtained with
getconf LFS_CFLAGS -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
getconf LFS_LDFLAGS # nothing special needed
getconf LFS_LIBS # nothing special needed
By default, perl uses the large file compilation environment and relies on
Solaris to do the underlying mapping of interfaces.
Building an LP64 perl
To compile a 64-bit application on an UltraSparc with a recent Sun
Compiler, you need to use the flag "-xarch=v9". getconf(1) will tell you
this, e.g.
$ getconf -a | grep v9
XBS5_LP64_OFF64_CFLAGS: -xarch=v9
XBS5_LP64_OFF64_LDFLAGS: -xarch=v9
XBS5_LP64_OFF64_LINTFLAGS: -xarch=v9
XBS5_LPBIG_OFFBIG_CFLAGS: -xarch=v9
XBS5_LPBIG_OFFBIG_LDFLAGS: -xarch=v9
XBS5_LPBIG_OFFBIG_LINTFLAGS: -xarch=v9
_XBS5_LP64_OFF64_CFLAGS: -xarch=v9
_XBS5_LP64_OFF64_LDFLAGS: -xarch=v9
_XBS5_LP64_OFF64_LINTFLAGS: -xarch=v9
_XBS5_LPBIG_OFFBIG_CFLAGS: -xarch=v9
_XBS5_LPBIG_OFFBIG_LDFLAGS: -xarch=v9
_XBS5_LPBIG_OFFBIG_LINTFLAGS: -xarch=v9
This flag is supported in Sun WorkShop Compilers 5.0 and onwards (now
marketed under the name Forte) when used on Solaris 7 or later on
UltraSparc systems.
If you are using gcc, you would need to use -mcpu=v9 -m64 instead. This
option is not yet supported as of gcc 2.95.2; from install/SPECIFIC in that
release:
GCC version 2.95 is not able to compile code correctly for sparc64
targets. Users of the Linux kernel, at least, can use the sparc32
program to start up a new shell invocation with an environment that
causes configure to recognize (via uname -a) the system as sparc-*-*
instead.
All this should be handled automatically by the hints file, if requested.
Long Doubles.
As of 5.8.1, long doubles are working if you use the Sun compilers (needed
for additional math routines not included in libm).
Threads in perl on Solaris.
It is possible to build a threaded version of perl on Solaris. The entire
perl thread implementation is still experimental, however, so beware.
Malloc Issues with perl on Solaris.
Starting from perl 5.7.1 perl uses the Solaris malloc, since the perl
malloc breaks when dealing with more than 2GB of memory, and the Solaris
malloc also seems to be faster.
If you for some reason (such as binary backward compatibility) really need
to use perl's malloc, you can rebuild perl from the sources and Configure
the build with
$ sh Configure -Dusemymalloc
You should not use perl's malloc if you are building with gcc. There are
reports of core dumps, especially in the PDL module. The problem appears
to go away under -DDEBUGGING, so it has been difficult to track down.
Sun's compiler appears to be okay with or without perl's malloc. [XXX
further investigation is needed here.]
MAKE PROBLEMS.
Dynamic Loading Problems With GNU as and GNU ld
If you have problems with dynamic loading using gcc on SunOS or
Solaris, and you are using GNU as and GNU ld, see the section "GNU as
and GNU ld" above.
ld.so.1: ./perl: fatal: relocation error:
If you get this message on SunOS or Solaris, and you're using gcc, it's
probably the GNU as or GNU ld problem in the previous item "GNU as and
GNU ld".
dlopen: stub interception failed
The primary cause of the 'dlopen: stub interception failed' message is
that the LD_LIBRARY_PATH environment variable includes a directory
which is a symlink to /usr/lib (such as /lib). See "LD_LIBRARY_PATH"
above.
#error "No DATAMODEL_NATIVE specified"
This is a common error when trying to build perl on Solaris 2.6 with a
gcc installation from Solaris 2.5 or 2.5.1. The Solaris header files
changed, so you need to update your gcc installation. You can either
rerun the fixincludes script from gcc or take the opportunity to update
your gcc installation.
sh: ar: not found
This is a message from your shell telling you that the command 'ar' was
not found. You need to check your PATH environment variable to make
sure that it includes the directory with the 'ar' command. This is a
common problem on Solaris, where 'ar' is in the /usr/ccs/bin/
directory.
MAKE TEST
op/stat.t test 4 in Solaris
op/stat.t test 4 may fail if you are on a tmpfs of some sort. Building in
/tmp sometimes shows this behavior. The test suite detects if you are
building in /tmp, but it may not be able to catch all tmpfs situations.
nss_delete core dump from op/pwent or op/grent
See "nss_delete core dump from op/pwent or op/grent" in perlhpux.
PREBUILT BINARIES OF PERL FOR SOLARIS.
You can pick up prebuilt binaries for Solaris from
<http://www.sunfreeware.com/>, <http://www.blastwave.org>, ActiveState
<http://www.activestate.com/>, and <http://www.perl.com/> under the
Binaries list at the top of the page. There are probably other sources as
well. Please note that these sites are under the control of their
respective owners, not the perl developers.
RUNTIME ISSUES FOR PERL ON SOLARIS.
Limits on Numbers of Open Files on Solaris.
The stdio(3C) manpage notes that for LP32 applications, only 255 files may
be opened using fopen(), and only file descriptors 0 through 255 can be
used in a stream. Since perl calls open() and then fdopen(3C) with the
resulting file descriptor, perl is limited to 255 simultaneous open files,
even if sysopen() is used. If this proves to be an insurmountable problem,
you can compile perl as a LP64 application, see "Building an LP64 perl" for
details. Note also that the default resource limit for open file
descriptors on Solaris is 255, so you will have to modify your ulimit or
rctl (Solaris 9 onwards) appropriately.
SOLARIS-SPECIFIC MODULES.
See the modules under the Solaris:: and Sun::Solaris namespaces on CPAN,
see <http://www.cpan.org/modules/by-module/Solaris/> and
<http://www.cpan.org/modules/by-module/Sun/>.
SOLARIS-SPECIFIC PROBLEMS WITH MODULES.
Proc::ProcessTable on Solaris
Proc::ProcessTable does not compile on Solaris with perl5.6.0 and higher if
you have LARGEFILES defined. Since largefile support is the default in
5.6.0 and later, you have to take special steps to use this module.
The problem is that various structures visible via procfs use off_t, and if
you compile with largefile support these change from 32 bits to 64 bits.
Thus what you get back from procfs doesn't match up with the structures in
perl, resulting in garbage. See proc(4) for further discussion.
A fix for Proc::ProcessTable is to edit Makefile to explicitly remove the
largefile flags from the ones MakeMaker picks up from Config.pm. This will
result in Proc::ProcessTable being built under the correct environment.
Everything should then be OK as long as Proc::ProcessTable doesn't try to
share off_t's with the rest of perl, or if it does they should be
explicitly specified as off64_t.
BSD::Resource on Solaris
BSD::Resource versions earlier than 1.09 do not compile on Solaris with
perl 5.6.0 and higher, for the same reasons as Proc::ProcessTable.
BSD::Resource versions starting from 1.09 have a workaround for the
problem.
Net::SSLeay on Solaris
Net::SSLeay requires a /dev/urandom to be present. This device is available
from Solaris 9 onwards. For earlier Solaris versions you can either get
the package SUNWski (packaged with several Sun software products, for
example the Sun WebServer, which is part of the Solaris Server Intranet
Extension, or the Sun Directory Services, part of Solaris for ISPs) or
download the ANDIrand package from <http://www.cosy.sbg.ac.at/~andi/>. If
you use SUNWski, make a symbolic link /dev/urandom pointing to /dev/random.
For more details, see Document ID27606 entitled "Differing /dev/random
support requirements within Solaris[TM] Operating Environments", available
at http://sunsolve.sun.com .
It may be possible to use the Entropy Gathering Daemon (written in Perl!),
available from <http://www.lothar.com/tech/crypto/>.
SunOS 4.x
In SunOS 4.x you most probably want to use the SunOS ld, /usr/bin/ld, since
the more recent versions of GNU ld (like 2.13) do not seem to work for
building Perl anymore. When linking the extensions, the GNU ld gets very
unhappy and spews a lot of errors like this
... relocation truncated to fit: BASE13 ...
and dies. Therefore the SunOS 4.1 hints file explicitly sets the ld to be
/usr/bin/ld.
As of Perl 5.8.1 the dynamic loading of libraries (DynaLoader, XSLoader)
also seems to have become broken in in SunOS 4.x. Therefore the default is
to build Perl statically.
Running the test suite in SunOS 4.1 is a bit tricky since the
lib/Tie/File/t/09_gen_rs test hangs (subtest #51, FWIW) for some unknown
reason. Just stop the test and kill that particular Perl process.
There are various other failures, that as of SunOS 4.1.4 and gcc 3.2.2 look
a lot like gcc bugs. Many of the failures happen in the Encode tests,
where for example when the test expects "0" you get "0" which should
after a little squinting look very odd indeed. Another example is earlier
in t/run/fresh_perl where chr(0xff) is expected but the test fails because
the result is chr(0xff). Exactly.
This is the "make test" result from the said combination:
Failed 27 test scripts out of 745, 96.38% okay.
Running the "harness" is painful because of the many failing Unicode-
related tests will output megabytes of failure messages, but if one
patiently waits, one gets these results:
Failed Test Stat Wstat Total Fail Failed List of Failed
-----------------------------------------------------------------------------
...
../ext/Encode/t/at-cn.t 4 1024 29 4 13.79% 14-17
../ext/Encode/t/at-tw.t 10 2560 17 10 58.82% 2 4 6 8 10 12
14-17
../ext/Encode/t/enc_data.t 29 7424 ?? ?? % ??
../ext/Encode/t/enc_eucjp.t 29 7424 ?? ?? % ??
../ext/Encode/t/enc_module.t 29 7424 ?? ?? % ??
../ext/Encode/t/encoding.t 29 7424 ?? ?? % ??
../ext/Encode/t/grow.t 12 3072 24 12 50.00% 2 4 6 8 10 12 14
16 18 20 22 24
Failed Test Stat Wstat Total Fail Failed List of Failed
------------------------------------------------------------------------------
../ext/Encode/t/guess.t 255 65280 29 40 137.93% 10-29
../ext/Encode/t/jperl.t 29 7424 15 30 200.00% 1-15
../ext/Encode/t/mime-header.t 2 512 10 2 20.00% 2-3
../ext/Encode/t/perlio.t 22 5632 38 22 57.89% 1-4 9-16 19-20
23-24 27-32
../ext/List/Util/t/shuffle.t 0 139 ?? ?? % ??
../ext/PerlIO/t/encoding.t 14 1 7.14% 11
../ext/PerlIO/t/fallback.t 9 2 22.22% 3 5
../ext/Socket/t/socketpair.t 0 2 45 70 155.56% 11-45
../lib/CPAN/t/vcmp.t 30 1 3.33% 25
../lib/Tie/File/t/09_gen_rs.t 0 15 ?? ?? % ??
../lib/Unicode/Collate/t/test.t 199 30 15.08% 7 26-27 71-75
81-88 95 101
103-104 106 108-
109 122 124 161
169-172
../lib/sort.t 0 139 119 26 21.85% 107-119
op/alarm.t 4 1 25.00% 4
op/utfhash.t 97 1 1.03% 31
run/fresh_perl.t 91 1 1.10% 32
uni/tr_7jis.t ?? ?? % ??
uni/tr_eucjp.t 29 7424 6 12 200.00% 1-6
uni/tr_sjis.t 29 7424 6 12 200.00% 1-6
56 tests and 467 subtests skipped.
Failed 27/811 test scripts, 96.67% okay. 1383/75399 subtests failed, 98.17% okay.
The alarm() test failure is caused by system() apparently blocking alarm().
That is probably a libc bug, and given that SunOS 4.x has been end-of-lifed
years ago, don't hold your breath for a fix. In addition to that, don't
try anything too Unicode-y, especially with Encode, and you should be fine
in SunOS 4.x.
AUTHOR
The original was written by Andy Dougherty doughera@lafayette.edu drawing
heavily on advice from Alan Burlison, Nick Ing-Simmons, Tim Bunce, and many
other Solaris users over the years.
Please report any errors, updates, or suggestions to perlbug@perl.org.
|
Index for
Section 1 |
|
|
Alphabetical
listing for P |
|
 |
Top of
page |
|