 |
Index for
Section 1 |
|
 |
Alphabetical
listing for P |
|
 |
Bottom of
page |
|
PERLUNIINTRO(1)
NAME
perluniintro - Perl Unicode introduction
DESCRIPTION
This document gives a general idea of Unicode and how to use Unicode in
Perl.
Unicode
Unicode is a character set standard which plans to codify all of the
writing systems of the world, plus many other symbols.
Unicode and ISO/IEC 10646 are coordinated standards that provide code
points for characters in almost all modern character set standards,
covering more than 30 writing systems and hundreds of languages, including
all commercially-important modern languages. All characters in the largest
Chinese, Japanese, and Korean dictionaries are also encoded. The standards
will eventually cover almost all characters in more than 250 writing
systems and thousands of languages.
A Unicode character is an abstract entity. It is not bound to any
particular integer width, especially not to the C language "char". Unicode
is language-neutral and display-neutral: it does not encode the language of
the text and it does not define fonts or other graphical layout details.
Unicode operates on characters and on text built from those characters.
Unicode defines characters like "LATIN CAPITAL LETTER A" or "GREEK SMALL
LETTER ALPHA" and unique numbers for the characters, in this case 0x0041
and 0x03B1, respectively. These unique numbers are called code points.
The Unicode standard prefers using hexadecimal notation for the code
points. If numbers like 0x0041 are unfamiliar to you, take a peek at a
later section, "Hexadecimal Notation". The Unicode standard uses the
notation "U+0041 LATIN CAPITAL LETTER A", to give the hexadecimal code
point and the normative name of the character.
Unicode also defines various properties for the characters, like
"uppercase" or "lowercase", "decimal digit", or "punctuation"; these
properties are independent of the names of the characters. Furthermore,
various operations on the characters like uppercasing, lowercasing, and
collating (sorting) are defined.
A Unicode character consists either of a single code point, or a base
character (like "LATIN CAPITAL LETTER A"), followed by one or more
modifiers (like "COMBINING ACUTE ACCENT"). This sequence of base character
and modifiers is called a combining character sequence.
Whether to call these combining character sequences "characters" depends on
your point of view. If you are a programmer, you probably would tend
towards seeing each element in the sequences as one unit, or "character".
The whole sequence could be seen as one "character", however, from the
user's point of view, since that's probably what it looks like in the
context of the user's language.
With this "whole sequence" view of characters, the total number of
characters is open-ended. But in the programmer's "one unit is one
character" point of view, the concept of "characters" is more
deterministic. In this document, we take that second point of view: one
"character" is one Unicode code point, be it a base character or a
combining character.
For some combinations, there are precomposed characters. "LATIN CAPITAL
LETTER A WITH ACUTE", for example, is defined as a single code point.
These precomposed characters are, however, only available for some
combinations, and are mainly meant to support round-trip conversions
between Unicode and legacy standards (like the ISO 8859). In the general
case, the composing method is more extensible. To support conversion
between different compositions of the characters, various normalization
forms to standardize representations are also defined.
Because of backward compatibility with legacy encodings, the "a unique
number for every character" idea breaks down a bit: instead, there is "at
least one number for every character". The same character could be
represented differently in several legacy encodings. The converse is also
not true: some code points do not have an assigned character. Firstly,
there are unallocated code points within otherwise used blocks. Secondly,
there are special Unicode control characters that do not represent true
characters.
A common myth about Unicode is that it would be "16-bit", that is, Unicode
is only represented as 0x10000 (or 65536) characters from 0x0000 to 0xFFFF.
This is untrue. Since Unicode 2.0, Unicode has been defined all the way up
to 21 bits (0x10FFFF), and since Unicode 3.1, characters have been defined
beyond 0xFFFF. The first 0x10000 characters are called the Plane 0, or the
Basic Multilingual Plane (BMP). With Unicode 3.1, 17 planes in all are
defined--but nowhere near full of defined characters, yet.
Another myth is that the 256-character blocks have something to do with
languages--that each block would define the characters used by a language
or a set of languages. This is also untrue. The division into blocks
exists, but it is almost completely accidental--an artifact of how the
characters have been and still are allocated. Instead, there is a concept
called scripts, which is more useful: there is "Latin" script, "Greek"
script, and so on. Scripts usually span varied parts of several blocks.
For further information see Unicode::UCD.
The Unicode code points are just abstract numbers. To input and output
these abstract numbers, the numbers must be encoded somehow. Unicode
defines several character encoding forms, of which UTF-8 is perhaps the
most popular. UTF-8 is a variable length encoding that encodes Unicode
characters as 1 to 6 bytes (only 4 with the currently defined characters).
Other encodings include UTF-16 and UTF-32 and their big- and little-endian
variants (UTF-8 is byte-order independent) The ISO/IEC 10646 defines the
UCS-2 and UCS-4 encoding forms.
For more information about encodings--for instance, to learn what
surrogates and byte order marks (BOMs) are--see perlunicode.
Perl's Unicode Support
Starting from Perl 5.6.0, Perl has had the capacity to handle Unicode
natively. Perl 5.8.0, however, is the first recommended release for
serious Unicode work. The maintenance release 5.6.1 fixed many of the
problems of the initial Unicode implementation, but for example regular
expressions still do not work with Unicode in 5.6.1.
Starting from Perl 5.8.0, the use of "use utf8" is no longer necessary. In
earlier releases the "utf8" pragma was used to declare that operations in
the current block or file would be Unicode-aware. This model was found to
be wrong, or at least clumsy: the "Unicodeness" is now carried with the
data, instead of being attached to the operations. Only one case remains
where an explicit "use utf8" is needed: if your Perl script itself is
encoded in UTF-8, you can use UTF-8 in your identifier names, and in string
and regular expression literals, by saying "use utf8". This is not the
default because scripts with legacy 8-bit data in them would break. See
utf8.
Perl's Unicode Model
Perl supports both pre-5.6 strings of eight-bit native bytes, and strings
of Unicode characters. The principle is that Perl tries to keep its data
as eight-bit bytes for as long as possible, but as soon as Unicodeness
cannot be avoided, the data is transparently upgraded to Unicode.
Internally, Perl currently uses either whatever the native eight-bit
character set of the platform (for example Latin-1) is, defaulting to
UTF-8, to encode Unicode strings. Specifically, if all code points in the
string are 0xFF or less, Perl uses the native eight-bit character set.
Otherwise, it uses UTF-8.
A user of Perl does not normally need to know nor care how Perl happens to
encode its internal strings, but it becomes relevant when outputting
Unicode strings to a stream without a PerlIO layer -- one with the
"default" encoding. In such a case, the raw bytes used internally (the
native character set or UTF-8, as appropriate for each string) will be
used, and a "Wide character" warning will be issued if those strings
contain a character beyond 0x00FF.
For example,
perl -e 'print "\x{DF}\n", "\x{0100}\x{DF}\n"'
produces a fairly useless mixture of native bytes and UTF-8, as well as a
warning:
Wide character in print at ...
To output UTF-8, use the ":utf8" output layer. Prepending
binmode(STDOUT, ":utf8");
to this sample program ensures that the output is completely UTF-8, and
removes the program's warning.
If your locale environment variables ("LANGUAGE", "LC_ALL", "LC_CTYPE",
"LANG") contain the strings 'UTF-8' or 'UTF8', regardless of case, then the
default encoding of your STDIN, STDOUT, and STDERR and of any subsequent
file open, is UTF-8. Note that this means that Perl expects other software
to work, too: if Perl has been led to believe that STDIN should be UTF-8,
but then STDIN coming in from another command is not UTF-8, Perl will
complain about the malformed UTF-8.
All features that combine Unicode and I/O also require using the new PerlIO
feature. Almost all Perl 5.8 platforms do use PerlIO, though: you can see
whether yours is by running "perl -V" and looking for "useperlio=define".
Unicode and EBCDIC
Perl 5.8.0 also supports Unicode on EBCDIC platforms. There, Unicode
support is somewhat more complex to implement since additional conversions
are needed at every step. Some problems remain, see perlebcdic for
details.
In any case, the Unicode support on EBCDIC platforms is better than in the
5.6 series, which didn't work much at all for EBCDIC platform. On EBCDIC
platforms, the internal Unicode encoding form is UTF-EBCDIC instead of
UTF-8. The difference is that as UTF-8 is "ASCII-safe" in that ASCII
characters encode to UTF-8 as-is, while UTF-EBCDIC is "EBCDIC-safe".
Creating Unicode
To create Unicode characters in literals for code points above 0xFF, use
the "\x{...}" notation in double-quoted strings:
my $smiley = "\x{263a}";
Similarly, it can be used in regular expression literals
$smiley =~ /\x{263a}/;
At run-time you can use "chr()":
my $hebrew_alef = chr(0x05d0);
See "Further Resources" for how to find all these numeric codes.
Naturally, "ord()" will do the reverse: it turns a character into a code
point.
Note that "\x.." (no "{}" and only two hexadecimal digits), "\x{...}", and
"chr(...)" for arguments less than 0x100 (decimal 256) generate an eight-
bit character for backward compatibility with older Perls. For arguments
of 0x100 or more, Unicode characters are always produced. If you want to
force the production of Unicode characters regardless of the numeric value,
use "pack("U", ...)" instead of "\x..", "\x{...}", or "chr()".
You can also use the "charnames" pragma to invoke characters by name in
double-quoted strings:
use charnames ':full';
my $arabic_alef = "\N{ARABIC LETTER ALEF}";
And, as mentioned above, you can also "pack()" numbers into Unicode
characters:
my $georgian_an = pack("U", 0x10a0);
Note that both "\x{...}" and "\N{...}" are compile-time string constants:
you cannot use variables in them. if you want similar run-time
functionality, use "chr()" and "charnames::vianame()".
Also note that if all the code points for pack "U" are below 0x100, bytes
will be generated, just like if you were using "chr()".
my $bytes = pack("U*", 0x80, 0xFF);
If you want to force the result to Unicode characters, use the special "U0"
prefix. It consumes no arguments but forces the result to be in Unicode
characters, instead of bytes.
my $chars = pack("U0U*", 0x80, 0xFF);
Handling Unicode
Handling Unicode is for the most part transparent: just use the strings as
usual. Functions like "index()", "length()", and "substr()" will work on
the Unicode characters; regular expressions will work on the Unicode
characters (see perlunicode and perlretut).
Note that Perl considers combining character sequences to be characters, so
for example
use charnames ':full';
print length("\N{LATIN CAPITAL LETTER A}\N{COMBINING ACUTE ACCENT}"), "\n";
will print 2, not 1. The only exception is that regular expressions have
"\X" for matching a combining character sequence.
Life is not quite so transparent, however, when working with legacy
encodings, I/O, and certain special cases:
Legacy Encodings
When you combine legacy data and Unicode the legacy data needs to be
upgraded to Unicode. Normally ISO 8859-1 (or EBCDIC, if applicable) is
assumed. You can override this assumption by using the "encoding" pragma,
for example
use encoding 'latin2'; # ISO 8859-2
in which case literals (string or regular expressions), "chr()", and
"ord()" in your whole script are assumed to produce Unicode characters from
ISO 8859-2 code points. Note that the matching for encoding names is
forgiving: instead of "latin2" you could have said "Latin 2", or
"iso8859-2", or other variations. With just
use encoding;
the environment variable "PERL_ENCODING" will be consulted. If that
variable isn't set, the encoding pragma will fail.
The "Encode" module knows about many encodings and has interfaces for doing
conversions between those encodings:
use Encode 'from_to';
from_to($data, "iso-8859-3", "utf-8"); # from legacy to utf-8
Unicode I/O
Normally, writing out Unicode data
print FH $some_string_with_unicode, "\n";
produces raw bytes that Perl happens to use to internally encode the
Unicode string. Perl's internal encoding depends on the system as well as
what characters happen to be in the string at the time. If any of the
characters are at code points 0x100 or above, you will get a warning. To
ensure that the output is explicitly rendered in the encoding you desire--
and to avoid the warning--open the stream with the desired encoding. Some
examples:
open FH, ">:utf8", "file";
open FH, ">:encoding(ucs2)", "file";
open FH, ">:encoding(UTF-8)", "file";
open FH, ">:encoding(shift_jis)", "file";
and on already open streams, use "binmode()":
binmode(STDOUT, ":utf8");
binmode(STDOUT, ":encoding(ucs2)");
binmode(STDOUT, ":encoding(UTF-8)");
binmode(STDOUT, ":encoding(shift_jis)");
The matching of encoding names is loose: case does not matter, and many
encodings have several aliases. Note that the ":utf8" layer must always be
specified exactly like that; it is not subject to the loose matching of
encoding names.
See PerlIO for the ":utf8" layer, PerlIO::encoding and Encode::PerlIO for
the ":encoding()" layer, and Encode::Supported for many encodings supported
by the "Encode" module.
Reading in a file that you know happens to be encoded in one of the Unicode
or legacy encodings does not magically turn the data into Unicode in Perl's
eyes. To do that, specify the appropriate layer when opening files
open(my $fh,'<:utf8', 'anything');
my $line_of_unicode = <$fh>;
open(my $fh,'<:encoding(Big5)', 'anything');
my $line_of_unicode = <$fh>;
The I/O layers can also be specified more flexibly with the "open" pragma.
See open, or look at the following example.
use open ':utf8'; # input and output default layer will be UTF-8
open X, ">file";
print X chr(0x100), "\n";
close X;
open Y, "<file";
printf "%#x\n", ord(<Y>); # this should print 0x100
close Y;
With the "open" pragma you can use the ":locale" layer
$ENV{LC_ALL} = $ENV{LANG} = 'ru_RU.KOI8-R';
# the :locale will probe the locale environment variables like LC_ALL
use open OUT => ':locale'; # russki parusski
open(O, ">koi8");
print O chr(0x430); # Unicode CYRILLIC SMALL LETTER A = KOI8-R 0xc1
close O;
open(I, "<koi8");
printf "%#x\n", ord(<I>), "\n"; # this should print 0xc1
close I;
or you can also use the ':encoding(...)' layer
open(my $epic,'<:encoding(iso-8859-7)','iliad.greek');
my $line_of_unicode = <$epic>;
These methods install a transparent filter on the I/O stream that converts
data from the specified encoding when it is read in from the stream. The
result is always Unicode.
The open pragma affects all the "open()" calls after the pragma by setting
default layers. If you want to affect only certain streams, use explicit
layers directly in the "open()" call.
You can switch encodings on an already opened stream by using "binmode()";
see "binmode" in perlfunc.
The ":locale" does not currently (as of Perl 5.8.0) work with "open()" and
"binmode()", only with the "open" pragma. The ":utf8" and ":encoding(...)"
methods do work with all of "open()", "binmode()", and the "open" pragma.
Similarly, you may use these I/O layers on output streams to automatically
convert Unicode to the specified encoding when it is written to the stream.
For example, the following snippet copies the contents of the file
"text.jis" (encoded as ISO-2022-JP, aka JIS) to the file "text.utf8",
encoded as UTF-8:
open(my $nihongo, '<:encoding(iso2022-jp)', 'text.jis');
open(my $unicode, '>:utf8', 'text.utf8');
while (<$nihongo>) { print $unicode }
The naming of encodings, both by the "open()" and by the "open" pragma, is
similar to the "encoding" pragma in that it allows for flexible names:
"koi8-r" and "KOI8R" will both be understood.
Common encodings recognized by ISO, MIME, IANA, and various other
standardisation organisations are recognised; for a more detailed list see
Encode::Supported.
"read()" reads characters and returns the number of characters. "seek()"
and "tell()" operate on byte counts, as do "sysread()" and "sysseek()".
Notice that because of the default behaviour of not doing any conversion
upon input if there is no default layer, it is easy to mistakenly write
code that keeps on expanding a file by repeatedly encoding the data:
# BAD CODE WARNING
open F, "file";
local $/; ## read in the whole file of 8-bit characters
$t = <F>;
close F;
open F, ">:utf8", "file";
print F $t; ## convert to UTF-8 on output
close F;
If you run this code twice, the contents of the file will be twice UTF-8
encoded. A "use open ':utf8'" would have avoided the bug, or explicitly
opening also the file for input as UTF-8.
NOTE: the ":utf8" and ":encoding" features work only if your Perl has been
built with the new PerlIO feature.
Displaying Unicode As Text
Sometimes you might want to display Perl scalars containing Unicode as
simple ASCII (or EBCDIC) text. The following subroutine converts its
argument so that Unicode characters with code points greater than 255 are
displayed as "\x{...}", control characters (like "\n") are displayed as
"\x..", and the rest of the characters as themselves:
sub nice_string {
join("",
map { $_ > 255 ? # if wide character...
sprintf("\\x{%04X}", $_) : # \x{...}
chr($_) =~ /[[:cntrl:]]/ ? # else if control character ...
sprintf("\\x%02X", $_) : # \x..
chr($_) # else as themselves
} unpack("U*", $_[0])); # unpack Unicode characters
}
For example,
nice_string("foo\x{100}bar\n")
returns:
"foo\x{0100}bar\x0A"
Special Cases
· Bit Complement Operator ~ And vec()
The bit complement operator "~" may produce surprising results if used
on strings containing characters with ordinal values above 255. In such
a case, the results are consistent with the internal encoding of the
characters, but not with much else. So don't do that. Similarly for
"vec()": you will be operating on the internally-encoded bit patterns
of the Unicode characters, not on the code point values, which is very
probably not what you want.
· Peeking At Perl's Internal Encoding
Normal users of Perl should never care how Perl encodes any particular
Unicode string (because the normal ways to get at the contents of a
string with Unicode--via input and output--should always be via
explicitly-defined I/O layers). But if you must, there are two ways of
looking behind the scenes.
One way of peeking inside the internal encoding of Unicode characters
is to use "unpack("C*", ..." to get the bytes or "unpack("H*", ...)" to
display the bytes:
# this prints c4 80 for the UTF-8 bytes 0xc4 0x80
print join(" ", unpack("H*", pack("U", 0x100))), "\n";
Yet another way would be to use the Devel::Peek module:
perl -MDevel::Peek -e 'Dump(chr(0x100))'
That shows the UTF8 flag in FLAGS and both the UTF-8 bytes and Unicode
characters in "PV". See also later in this document the discussion
about the "is_utf8" function of the "Encode" module.
Advanced Topics
· String Equivalence
The question of string equivalence turns somewhat complicated in
Unicode: what do you mean by "equal"?
(Is "LATIN CAPITAL LETTER A WITH ACUTE" equal to "LATIN CAPITAL LETTER
A"?)
The short answer is that by default Perl compares equivalence ("eq",
"ne") based only on code points of the characters. In the above case,
the answer is no (because 0x00C1 != 0x0041). But sometimes, any
CAPITAL LETTER As should be considered equal, or even As of any case.
The long answer is that you need to consider character normalization
and casing issues: see Unicode::Normalize, Unicode Technical Reports
#15 and #21, Unicode Normalization Forms and Case Mappings,
http://www.unicode.org/unicode/reports/tr15/ and
http://www.unicode.org/unicode/reports/tr21/
As of Perl 5.8.0, the "Full" case-folding of Case
Mappings/SpecialCasing is implemented.
· String Collation
People like to see their strings nicely sorted--or as Unicode parlance
goes, collated. But again, what do you mean by collate?
(Does "LATIN CAPITAL LETTER A WITH ACUTE" come before or after "LATIN
CAPITAL LETTER A WITH GRAVE"?)
The short answer is that by default, Perl compares strings ("lt", "le",
"cmp", "ge", "gt") based only on the code points of the characters. In
the above case, the answer is "after", since 0x00C1 > 0x00C0.
The long answer is that "it depends", and a good answer cannot be given
without knowing (at the very least) the language context. See
Unicode::Collate, and Unicode Collation Algorithm
http://www.unicode.org/unicode/reports/tr10/
Miscellaneous
· Character Ranges and Classes
Character ranges in regular expression character classes ("/[a-z]/")
and in the "tr///" (also known as "y///") operator are not magically
Unicode-aware. What this means that "[A-Za-z]" will not magically
start to mean "all alphabetic letters"; not that it does mean that even
for 8-bit characters, you should be using "/[[:alpha:]]/" in that case.
For specifying character classes like that in regular expressions, you
can use the various Unicode properties--"\pL", or perhaps
"\p{Alphabetic}", in this particular case. You can use Unicode code
points as the end points of character ranges, but there is no magic
associated with specifying a certain range. For further information--
there are dozens of Unicode character classes--see perlunicode.
· String-To-Number Conversions
Unicode does define several other decimal--and numeric--characters
besides the familiar 0 to 9, such as the Arabic and Indic digits. Perl
does not support string-to-number conversion for digits other than
ASCII 0 to 9 (and ASCII a to f for hexadecimal).
Questions With Answers
· Will My Old Scripts Break?
Very probably not. Unless you are generating Unicode characters
somehow, old behaviour should be preserved. About the only behaviour
that has changed and which could start generating Unicode is the old
behaviour of "chr()" where supplying an argument more than 255 produced
a character modulo 255. "chr(300)", for example, was equal to
"chr(45)" or "-" (in ASCII), now it is LATIN CAPITAL LETTER I WITH
BREVE.
· How Do I Make My Scripts Work With Unicode?
Very little work should be needed since nothing changes until you
generate Unicode data. The most important thing is getting input as
Unicode; for that, see the earlier I/O discussion.
· How Do I Know Whether My String Is In Unicode?
You shouldn't care. No, you really shouldn't. No, really. If you
have to care--beyond the cases described above--it means that we didn't
get the transparency of Unicode quite right.
Okay, if you insist:
use Encode 'is_utf8';
print is_utf8($string) ? 1 : 0, "\n";
But note that this doesn't mean that any of the characters in the
string are necessary UTF-8 encoded, or that any of the characters have
code points greater than 0xFF (255) or even 0x80 (128), or that the
string has any characters at all. All the "is_utf8()" does is to
return the value of the internal "utf8ness" flag attached to the
$string. If the flag is off, the bytes in the scalar are interpreted
as a single byte encoding. If the flag is on, the bytes in the scalar
are interpreted as the (multi-byte, variable-length) UTF-8 encoded code
points of the characters. Bytes added to an UTF-8 encoded string are
automatically upgraded to UTF-8. If mixed non-UTF8 and UTF-8 scalars
are merged (double-quoted interpolation, explicit concatenation, and
printf/sprintf parameter substitution), the result will be UTF-8
encoded as if copies of the byte strings were upgraded to UTF-8: for
example,
$a = "ab\x80c";
$b = "\x{100}";
print "$a = $b\n";
the output string will be UTF-8-encoded "ab\x80c\x{100}\n", but note
that $a will stay byte-encoded.
Sometimes you might really need to know the byte length of a string
instead of the character length. For that use either the
"Encode::encode_utf8()" function or the "bytes" pragma and its only
defined function "length()":
my $unicode = chr(0x100);
print length($unicode), "\n"; # will print 1
require Encode;
print length(Encode::encode_utf8($unicode)), "\n"; # will print 2
use bytes;
print length($unicode), "\n"; # will also print 2
# (the 0xC4 0x80 of the UTF-8)
· How Do I Detect Data That's Not Valid In a Particular Encoding?
Use the "Encode" package to try converting it. For example,
use Encode 'encode_utf8';
if (encode_utf8($string_of_bytes_that_I_think_is_utf8)) {
# valid
} else {
# invalid
}
For UTF-8 only, you can use:
use warnings;
@chars = unpack("U0U*", $string_of_bytes_that_I_think_is_utf8);
If invalid, a "Malformed UTF-8 character (byte 0x##) in unpack" warning
is produced. The "U0" means "expect strictly UTF-8 encoded Unicode".
Without that the "unpack("U*", ...)" would accept also data like
"chr(0xFF"), similarly to the "pack" as we saw earlier.
· How Do I Convert Binary Data Into a Particular Encoding, Or Vice Versa?
This probably isn't as useful as you might think. Normally, you
shouldn't need to.
In one sense, what you are asking doesn't make much sense: encodings
are for characters, and binary data are not "characters", so converting
"data" into some encoding isn't meaningful unless you know in what
character set and encoding the binary data is in, in which case it's
not just binary data, now is it?
If you have a raw sequence of bytes that you know should be interpreted
via a particular encoding, you can use "Encode":
use Encode 'from_to';
from_to($data, "iso-8859-1", "utf-8"); # from latin-1 to utf-8
The call to "from_to()" changes the bytes in $data, but nothing
material about the nature of the string has changed as far as Perl is
concerned. Both before and after the call, the string $data contains
just a bunch of 8-bit bytes. As far as Perl is concerned, the encoding
of the string remains as "system-native 8-bit bytes".
You might relate this to a fictional 'Translate' module:
use Translate;
my $phrase = "Yes";
Translate::from_to($phrase, 'english', 'deutsch');
## phrase now contains "Ja"
The contents of the string changes, but not the nature of the string.
Perl doesn't know any more after the call than before that the contents
of the string indicates the affirmative.
Back to converting data. If you have (or want) data in your system's
native 8-bit encoding (e.g. Latin-1, EBCDIC, etc.), you can use
pack/unpack to convert to/from Unicode.
$native_string = pack("C*", unpack("U*", $Unicode_string));
$Unicode_string = pack("U*", unpack("C*", $native_string));
If you have a sequence of bytes you know is valid UTF-8, but Perl
doesn't know it yet, you can make Perl a believer, too:
use Encode 'decode_utf8';
$Unicode = decode_utf8($bytes);
You can convert well-formed UTF-8 to a sequence of bytes, but if you
just want to convert random binary data into UTF-8, you can't. Any
random collection of bytes isn't well-formed UTF-8. You can use
"unpack("C*", $string)" for the former, and you can create well-formed
Unicode data by "pack("U*", 0xff, ...)".
· How Do I Display Unicode? How Do I Input Unicode?
See http://www.alanwood.net/unicode/ and
http://www.cl.cam.ac.uk/~mgk25/unicode.html
· How Does Unicode Work With Traditional Locales?
In Perl, not very well. Avoid using locales through the "locale"
pragma. Use only one or the other.
Hexadecimal Notation
The Unicode standard prefers using hexadecimal notation because that more
clearly shows the division of Unicode into blocks of 256 characters.
Hexadecimal is also simply shorter than decimal. You can use decimal
notation, too, but learning to use hexadecimal just makes life easier with
the Unicode standard. The "U+HHHH" notation uses hexadecimal, for example.
The "0x" prefix means a hexadecimal number, the digits are 0-9 and a-f (or
A-F, case doesn't matter). Each hexadecimal digit represents four bits, or
half a byte. "print 0x..., "\n"" will show a hexadecimal number in
decimal, and "printf "%x\n", $decimal" will show a decimal number in
hexadecimal. If you have just the "hex digits" of a hexadecimal number,
you can use the "hex()" function.
print 0x0009, "\n"; # 9
print 0x000a, "\n"; # 10
print 0x000f, "\n"; # 15
print 0x0010, "\n"; # 16
print 0x0011, "\n"; # 17
print 0x0100, "\n"; # 256
print 0x0041, "\n"; # 65
printf "%x\n", 65; # 41
printf "%#x\n", 65; # 0x41
print hex("41"), "\n"; # 65
Further Resources
· Unicode Consortium
http://www.unicode.org/
· Unicode FAQ
http://www.unicode.org/unicode/faq/
· Unicode Glossary
http://www.unicode.org/glossary/
· Unicode Useful Resources
http://www.unicode.org/unicode/onlinedat/resources.html
· Unicode and Multilingual Support in HTML, Fonts, Web Browsers and Other
Applications
http://www.alanwood.net/unicode/
· UTF-8 and Unicode FAQ for Unix/Linux
http://www.cl.cam.ac.uk/~mgk25/unicode.html
· Legacy Character Sets
http://www.czyborra.com/
http://www.eki.ee/letter/
· The Unicode support files live within the Perl installation in the
directory
$Config{installprivlib}/unicore
in Perl 5.8.0 or newer, and
$Config{installprivlib}/unicode
in the Perl 5.6 series. (The renaming to lib/unicore was done to avoid
naming conflicts with lib/Unicode in case-insensitive filesystems.) The
main Unicode data file is UnicodeData.txt (or Unicode.301 in Perl
5.6.1.) You can find the $Config{installprivlib} by
perl "-V:installprivlib"
You can explore various information from the Unicode data files using
the "Unicode::UCD" module.
UNICODE IN OLDER PERLS
If you cannot upgrade your Perl to 5.8.0 or later, you can still do some
Unicode processing by using the modules "Unicode::String", "Unicode::Map8",
and "Unicode::Map", available from CPAN. If you have the GNU recode
installed, you can also use the Perl front-end "Convert::Recode" for
character conversions.
The following are fast conversions from ISO 8859-1 (Latin-1) bytes to UTF-8
bytes, the code works even with older Perl 5 versions.
# ISO 8859-1 to UTF-8
s/([\x80-\xFF])/chr(0xC0|ord($1)>>6).chr(0x80|ord($1)&0x3F)/eg;
# UTF-8 to ISO 8859-1
s/([\xC2\xC3])([\x80-\xBF])/chr(ord($1)<<6&0xC0|ord($2)&0x3F)/eg;
SEE ALSO
perlunicode, Encode, encoding, open, utf8, bytes, perlretut,
Unicode::Collate, Unicode::Normalize, Unicode::UCD
ACKNOWLEDGMENTS
Thanks to the kind readers of the perl5-porters@perl.org,
perl-unicode@perl.org, linux-utf8@nl.linux.org, and unicore@unicode.org
mailing lists for their valuable feedback.
AUTHOR, COPYRIGHT, AND LICENSE
Copyright 2001-2002 Jarkko Hietaniemi <jhi@iki.fi>
This document may be distributed under the same terms as Perl itself.
|
Index for
Section 1 |
|
|
Alphabetical
listing for P |
|
 |
Top of
page |
|