 |
Index for
Section 8 |
|
 |
Alphabetical
listing for E |
|
 |
Bottom of
page |
|
EXPIRE(8)
NAME
expire - Usenet article and history expiration program
SYNOPSIS
expire [ -d dir ] [ -f file ] [ -g file ] [ -h file ] [ -i ] [ -N ] [ -n ]
[ -p ] [ -r reason ] [ -t ] [ -v level ] [ -w number ] [ -x ] [ -z file ] [
expire.ctl ]
DESCRIPTION
Expire scans the history(5) text file <pathdb in inn.conf>/history and uses
the information recorded in it to purge itself or old news articles. And
if the article whose storage method has self expire functionality, the
control file is ignored except ``/remember/'' line for that article by
default. In this case, expire probes the article to see if it still
exists. If it does not exist, expire purges the relevant entries. To
disable this, use the ``-N'' flag. If ``groupbaseexpiry'' in inn.conf is
true, expire always treats all stored articles whose storage method have
self expire functionality regardless of its actual method. In this case
``-e'', ``-k'', ``-N'', ``-p'', ``-q'', ``-w'' and ``-z'' flags are
ignored.
Note that expire never purges articles which do not match any entry.
OPTIONS
-d If the ``-d'' flag is used, then the new history file and database is
created in the specified directory, dir. This is useful when the
filesystem does not have sufficient space to hold both the old and new
history files. When this flag is used, expire leaves the server
paused and creates a zero-length file named after the new history
file, with an extension of ``.done'' to indicate that it has
successfully completed the expiration. The calling script should
install the new history file and un-pause the server. The ``-r'' flag
should be used with this flag. -f To specify an alternate history
file, use the ``-f'' flag. This flag is valid if ``-d'' flag is used
together, and the output will be written to this file. The default
without ``-f'' flag is ``history.''
-g If the ``-g'' flag is given, then a one-line summary equivalent to the
output of ``-v 1'' and preceded by the current time, will be appended
to the specified file.
-h To specify an alternate input text history file, use the ``-h'' flag.
Expire uses the old dbz(3) database to determine the size of the new
one. If ``-d'' flag is not used together, and the output file name
will be with an extension of ``.n.'' The default without ``-h'' flag
is <pathdb in inn.conf>/history.
-i To ignore the old database, use the ``-i'' flag.
-N If the article whose storage method has self expire functionality,
then the control file is ignored for that article by default. If the
``-N'' flag is used, expire still uses the control file in this case.
-n If innd is not running, use the ``-n'' flag and expire will not send
the ``pause'' or ``go'' commands. (For more details on the commands,
see ctlinnd(8)). Note that expire only needs exclusive access for a
very short time - long enough to see if any new articles arrived since
it first hit the end of the file, and to rename the new files to the
working files.
-p Expire makes its decisions on the time the article arrived, as found
in the history file. This means articles are often kept a little
longer than with other expiration programs that base their decisions
on the article's posting date. To use the article's posting date, use
the ``-p'' flag.
-r Expire normally sends a ``pause'' command to the local innd(8) daemon
when it needs exclusive access to the history file, using the string
``Expiring'' as the reason. To give a different reason, use the
``-r'' flag. The process ID will be appended to the reason. When
expire is finished and the new history file is ready, it sends a
``go'' command.
-t If the ``-t'' flag is used, then expire will generate a list of the
tokens that should be removed on its standard output, and the new
history file will be left in history.n, history.n.dir, history.n.index
and history.n.hash. This flag be useful for debugging when used with
the ``-n'' flags. Note that if the ``-f'' flag is used, then the name
specified with that flag will be used instead of history.
-v The ``-v'' flag is used to increase the verbosity of the program,
generating messages to standard output. The level should be a number,
where higher numbers result in more output. Level one will print
totals of the various actions done (not valid if a new history file is
not written), level two will print report on each individual file,
while level five results in more than one line of output for every
line processed.
-w Use the ``-w'' flag to ``warp'' time so that expire thinks it is
running at some time other then the current time. The value should be
a signed floating point number of the number of days to use as the
offset.
-x If the ``-x'' flag is used, then expire will not create any new
history files. This is most useful when combined with the ``-n'' and
``-t'' flags to see how different expiration policies would change the
amount of disk space used.
-z If the ``-z'' flag is used, then articles are not removed, but their
names are appended to the specified file. See the description of
delayrm in news.daily(8).
If a filename is specified, it is taken as the control file and parsed
according to the rules in expire.ctl(5). A single dash (``-'') may be used
to read the file from standard input. If no file is specified, the file
<pathetc in inn.conf>/expire.ctl is read.
HISTORY
Written by Rich $alz <rsalz@uunet.uu.net> for InterNetNews. This is
revision 1.19.2.1, dated 2000/08/17.
SEE ALSO
ctlinnd(8), dbz(3), expire.ctl(5), history(5), inn.conf(5), innd(8),
inndcomm(3).
|
Index for
Section 8 |
|
|
Alphabetical
listing for E |
|
 |
Top of
page |
|