myvga:

#
# MYVGA example driver sysconfigtab entry
#

  Subsystem_Description = myvga device driver
  Module_Config_Name = myvga
  MYVGA_Developer_Debug = 1
  Num_Units_Installed = 1
  Interrupt_Enable = 1
#
#  PCI Mach32 card
#
#    NOTE: to support different card, need the same entry with the
#          card's Vendor ID and device ID
#
  PCI_Option =  PCI_SE_Rev - 0x210, Vendor_Id - 0x1002, Device_Id - 0x4158, Rev - 0, Base - 0, Sub - 0, Pif - 0 Sub_Vid - 0, Sub_Did - 0, Vid_Mo_Flag - 1, Did_Mo_Flag - 1, Rev_Mo_Flag - 0, Base_Mo_Flag - 0, Sub_Mo_Flag - 0, Pif_Mo_Flag - 0, Sub_Vid_Mo_Flag - 0, Sub_Did_Mo_Flag - 0, Driver_Name - myvga, Type - C, Adpt_Config - N
#
# EISA - any VGA card using the ISA0099 ECU config file
#
  EISA_Option =  Board_Id - ISA0099, Function_Name - Null, Driver_Name - myvga, Type - C, Adpt_Config - N
#
# ISA - any VGA card
#
#       use: >>>isacfg -slot 1 -dev 0 -mk -handle MYVGA -etyp 1  -enadev 1
#              -membase0 0a0000 -memlen0 020000 
#
  ISA_Option =  Board_Id - Null, Function_Name - 'MYVGA' , Driver_Name - myvga, Type - C, Adpt_Config - N