Chapter 3 Release Notes

Table of Contents

3-1 Installation Release Notes

3-1-1 Presence of Some Insight Management Agents Kits Might Require Additional Steps
3-1-2 Stop sendmail Before Installing Kit
3-1-3 Run Commands on BIND Systems After Kit Installation
3-1-4 inetd Daemon Restart Required
3-1-5 Kit Installation Causes Configuration File Restoration Failure
3-1-6 Run ipsec Command After Installing Kit
3-1-7 Update lprsetup.dat File When Using printconfg
3-1-8 AdvFS Domain Differences Can Affect Version Upgrades
3-1-9 Possible Errors Seen After Kit Installation
3-1-10 Message Seen During Reboot Can Be Ignored

3-2 Kit Removal Release Notes

3-2-1 Some Patch Kits Cannot Be Removed
3-2-2 Changes to System Might Need to Be Reversed
3-2-3 Script Must Be Run When Returning to Prepatched System

3-3 Cluster-Specific Installation and Removal Release Notes

3-3-1 Extract dupatch Tools Before Cloning
3-3-2 dupclone Error Message Can Be Ignored
3-3-3 Installed CSP Might Affect dupatch Cloning Process
3-3-4 Migrating a Patched Standalone System to a Cluster
3-3-5 Disable vfast Utility If Running on Cluster Domains
3-3-6 Creation of Some MFS File Systems Depends on Version Switch
3-3-7 Workaround Saves Files to Enable Patch Kit Removal
3-3-8 Enabling the Version Switch After Installation
3-3-9 Script Required to Reverse Version Switch
3-3-10 Restriction on Using No-Roll Procedure to Remove Kit
3-3-11 Do Not Install Prior NHD Kits on a Patched System

3-4 General Release Notes

3-4-1 Tru64 UNIX Rebranding Results in File Changes
3-4-2 Error on Installing Japanese Advanced Printing Software Subsets
3-4-3 Authentication Choice Affects sftp Transfer Rate
3-4-4 Insight Manager Components Dump Core
3-4-5 Autoloader Firmware Upgrade Changes WWID
3-4-6 Smart Array Booting Problem Might Require Service Call
3-4-7 Do Not Use dxarchiver to Verify Bootable Tape
3-4-8 securenets File Requires localhost Entry
3-4-9 SIA sialog Use Limitation Required

This chapter provides release notes that are specific to Version 5.1B-4 and the TruCluster Server software product. “Installation Release Notes”, “Kit Removal Release Notes”, and “Cluster-Specific Installation and Removal Release Notes” provide information you need to be aware of when installing or removing Version 5.1B-4. “General Release Notes” describes issues you may encounter and, when available, provides workarounds you can use.

If you have not previously patched your Version 5.1B system, including upgrading to Versions 5.1B-1, 5.1B-2, or 5.1B-3, be sure to read the Patch Summary and Release Notes document included on the Tru64 UNIX CD, which provides additional release notes you should be aware of. See the 00-READ-ME-FIRST file on the Version 5.1B-4 CD for information about accessing the Patch Summary and Release Notes. See also Chapter 4 for information on viewing the Patch Summary and Release Notes on the Web.